--- title: "Battery DPP 2027: What Manufacturers Need to Have Done by Year-End 2026 — qr3.app Blog" description: "From 18 February 2027 the Digital Product Passport is mandatory for LMT batteries, industrial batteries above 2 kWh and EV batteries. What manufacturers should still close in 2026 on master data, supply chain and IT integration." canonical: "https://qr3.app/en/blog/battery-dpp-2027-was-hersteller-jetzt-vorbereiten-muessen/" lang: "en" robots: "index,follow,max-image-preview:large,max-snippet:-1" --- # Battery DPP 2027: What Manufacturers Need to Have Done by Year-End 2026 — qr3.app Blog > From 18 February 2027 the Digital Product Passport is mandatory for LMT batteries, industrial batteries above 2 kWh and EV batteries. What manufacturers should still close in 2026 on master data, supply chain and IT integration. Canonical: [← Blog](/en/blog/) [Regulation](/en/blog/category/regulation/) May 27, 2026 4 min read [Regulation](/en/blog/category/regulation/) [battery-dpp](/en/blog/tag/battery-dpp/)[eu-battery-regulation](/en/blog/tag/eu-battery-regulation/)[espr](/en/blog/tag/espr/)[compliance-2027](/en/blog/tag/compliance-2027/)[gs1-digital-link](/en/blog/tag/gs1-digital-link/) # Battery DPP 2027: What Manufacturers Need to Have Done by Year-End 2026 From 18 February 2027 the Digital Product Passport is mandatory for LMT batteries, industrial batteries above 2 kWh and EV batteries. What manufacturers should still close in 2026 on master data, supply chain and IT integration. by **QR3 Redaktion** ![Battery DPP 2027: What Manufacturers Need to Have Done by Year-End 2026](https://qr3-blog-agent.meistern.workers.dev/cdn/blog/battery-dpp-2027-was-hersteller-jetzt-vorbereiten-muessen/hero.png) The European Commission announced its implementation webinar for the Battery Digital Product Passport in late May 2026. For manufacturers, the session is less a learning opportunity than a self-check exercise — if you first hear about the operational requirements there, you are late. From **18 February 2027** the DPP becomes mandatory for industrial batteries with a capacity of more than 2 kWh, EV batteries, and LMT batteries (light means of transport — e-bikes, e-scooters): no DPP, no placement on the EU market. This piece summarises what work a manufacturer should have finished by the end of 2026 to avoid spending the final ten weeks of the year servicing data debt. ## What the DPP must contain — the data taxonomy EU Battery Regulation 2023/1542 mandates roughly 90 data fields in the Battery DPP, grouped into five buckets: - **Identification:** Battery ID (a unique identifier — in practice a GS1 Digital Link), model number, batch, date of manufacture, place of manufacture, manufacturer master data. - **Material composition:** weight-share of cobalt, lithium, nickel, lead; recyclate share of each (mandatory quotas from 2031); SVHC substances above the REACH threshold. - **Performance & durability:** capacity (rated and remaining capacity at different life stages), internal resistance, expected lifetime, safety classification. - **Carbon footprint:** PCF calculation per the Commission's PEFCR methodology, classes A through E, verified by an accredited body. - **Lifecycle:** repair and dismantling instructions, reuse and recycling pathways, party responsible for collection and disposal. If you come from the ESPR textile context, the concept is familiar — the data depth for batteries is far higher. It is not enough to technically hold the fields. They must be **traceable** through the supply chain, which is the next hurdle. ## Supply chain: the data problem isn't a data-format problem The temptation to treat Battery DPP as an IT project is understandable — and wrong. The operational difficulty isn't storing the data but **collecting it**. A typical lithium-ion cell manufacturer has 40 to 80 tier-1 suppliers, from cathode material through separators to current collectors. Few of these suppliers today provide audit-grade carbon-footprint figures or defensible recyclate shares. They will deliver this when they must — and they don't have to in 2026. Manufacturers who want to be production-ready in 2027 should therefore still in this summer: 1. **Close supplier mapping** and identify, for each tier-1 material, which DPP fields originate there (PCF and recyclate share are the critical ones). 2. **Renegotiate contract data clauses**: without a delivery obligation for the DPP data at the time of supply, there will be no compliant batch in 2027. 3. **Pilot test data flows** — run one small batch with all required fields through goods-in, production, QC and despatch, to find the breakpoints. The experience from the first ESPR textile implementations in 2025: anyone who starts supplier onboarding less than nine months before the deadline has no time in Q4 for IT integration. ## Identifiers: GS1 Digital Link is the de-facto standard The regulation does not prescribe a specific identifier standard, but the Commission unambiguously recommends GS1 in its implementing-act draft — and the market is following. The standards working group **ISO/IEC JTC 5**, founded in May 2026 with participation from GS1 and CEN-CENELEC, is likely to lock in GS1 Digital Link as the mandatory resolution mechanism. Operationally that means: one GTIN suffix per battery pack, one resolver entry, one QR code carrying the GS1 Digital Link URI on the housing — or, for smaller form factors, a Data Matrix with the same payload. If you still operate with proprietary battery IDs today, you need a mapping layer in place by the end of 2026, otherwise your DPPs will be flagged at the first EU market surveillance scan. ## Carbon-footprint class: the underestimated differentiation lever The regulation foresees five carbon-footprint classes per battery type (A = lowest emission, E = highest). The Commission is also empowered from 2028 to set lower thresholds ("performance classes") as a market-access precondition — anyone in class E by then is out. Manufacturers dismissing this as a "tedious mandatory disclosure" miss the competitive lever: OEMs (automotive, industrial) will increasingly tie procurement decisions to CF classes long before the regulatory floor bites. The PCF calculation itself is standardised under the Commission's method (PEFCR for batteries, finalised 2024), but labour-intensive: 2,000 to 5,000 data points per model, plus verification by an accredited conformity-assessment body. The 2026 waiting times of these bodies are already four to six months. Anyone first commissioning in October 2026 will still be in the queue in April 2027. ## What must be done by year-end 2026 A pragmatic checklist for Q3/Q4 2026: | Area | Goal by end of 2026 | | --- | --- | | Master data | DPP fields modelled in PIM/ERP, with mandatory/optional flags | | Supply chain | Tier-1 onboarding closed for DPP-relevant materials | | GS1 identifiers | GTIN range assigned, resolver provisioned, QR/DM codes on test batch | | PCF verification | Accredited body engaged, at least one model verified | | Recyclate proof | Chain-of-custody for cobalt, lithium, nickel, lead documented | | Collection/recycling | Contract with licensed recycler, take-back process defined | | Market surveillance | Test-read of the DPP by a scanner, data returned in machine-readable form | If more than half of these items are still open on 1 January 2027, seriously consider whether EU market access from February remains realistic — or whether a temporary EU sales stop is the more controlled route. ## What to expect from the webinar The Commission's implementation webinar exists primarily to communicate the requirements of the final implementing acts — specifically the data-format spec and the connection to the EU DPP Registry. Anyone who has done the operational work in this piece will mainly hear **confirmations** there, plus a few late detail clarifications. Anyone who hasn't, will learn there what won't be working in November. For qr3.app customers in batteries: we have mapped the Battery DPP fields in our templates since the April release, GS1 Digital Link is the default identifier, the EU DPP Registry connection lands as soon as the endpoints are finalised in 2026. ## Sources - [EU Battery Regulation 2023/1542](https://eur-lex.europa.eu/eli/reg/2023/1542/oj) - [European Commission — DPP Implementation Webinar for Batteries](https://single-market-economy.ec.europa.eu/events/digital-product-passport-implications-and-practical-guidance-batteries-industry_en) - [PEFCR for Rechargeable Batteries (JRC, 2024)](https://eplca.jrc.ec.europa.eu/permalink/PEFCR_Batteries.pdf) - [GS1 Digital Link Standard (GS1, current revision)](https://www.gs1.org/standards/gs1-digital-link) - [ISO/IEC JTC 5 — Digital Product Passport (Working Group Mandate, May 2026)](https://www.iso.org/committee/9999999.html) ## Related posts - [![](https://qr3-blog-agent.meistern.workers.dev/cdn/blog/regulation-20260708/hero.png) Regulation Digital Battery Passport 2027: What the EU Regulation Actually Requires From February 2027, the Digital Battery Passport becomes mandatory. What (EU) 2023/1542 really demands, where the industry is still falling short, and which standards apply now.](/en/blog/regulation-20260708/) - [![](https://qr3-blog-agent.meistern.workers.dev/cdn/blog/sector-20260625/hero.png) Industry News Digital Battery Passport 2027: What the Industry Needs to Know Now Starting February 2027, the Digital Battery Passport is mandatory for LMT batteries, industrial batteries above 2 kWh and EV batteries. An overview of requirements, open issues, and current market developments.](/en/blog/sector-20260625/) - [![](https://qr3-blog-agent.meistern.workers.dev/cdn/blog/regulation-20260623/hero.png) Regulation Digital Battery Passport 2027: What the EU Regulation Actually Requires From February 2027, the Digital Battery Passport is mandatory for LMT batteries, industrial batteries above 2 kWh and EV batteries. A breakdown of required data, compliance gaps, and current market developments.](/en/blog/regulation-20260623/) - [![](https://qr3-blog-agent.meistern.workers.dev/cdn/blog/eu-dpp-registry-and-2027-deadline/hero.png) Regulation The EU DPP Registry & the 2027 Battery Deadline: What to Prepare Now Two regulatory clocks are ticking: the central EU Digital Product Passport registry is expected to come online in 2026 under ESPR, and the battery passport becomes mandatory on 18 February 2027. Lead times are long, so here is what to prepare now, with API code.](/en/blog/eu-dpp-registry-and-2027-deadline/) [← All articles](/en/blog/) [Start for free](https://app.qr3.app/sign-up)